HINT: BE CAREFULwhen removing the flush valve from the basket as your flush valve may have gone a little brittle over time and we have known instances of the clips on the basket breaking off and it is then not useable. Looking in the cistern it isn't over-filling, it just seems that it is not fully sealing off - either because the seal is worn or the mechanism is too lime-scaled up. If only one of the buttons on the S4399AA dual flush plate has stopped working the most likely problem is that one of the SV70367 pneumatic diaphragm washers fitted into the top of the flush valve has failed E600767 - Sottini Conceala 2 Cistern - Pneumatic Dual Flush Valve - top inlet Cistern - No Flushplate - 6 or 4.5 litre flush If the only way to access is essentially breaking through the tiled top – is there any way to do this to limit the damage/repair work needed?

Fits multiple Ideal Standard, Armitage Shanks and Sottini flush valves including SV89067 SV92667 SV92467 SV93467 It seems like maybe it would fit out if the button panel was directly above the cistern, but it has been fitted slightly forward. Table below provides a guide on how to identify and choose your correct ideal Standard Armitage Shanks Fastpart Spares Push Button flush valve /SYPHON, The SV01967 AMSTD FASTPART SEALwill fit all the Flush Valves in this table. Sottini Conceala 2 universal height, top inlet cistern - pneumatic dual flush valve - no flushplate - 6 or 4.5 litre flush Ideal Standard Flush Valve, Sottini Conceala Dual Flush Valve, Sv05767 Sv93467 Concealed Cisterns Pneumatic FlushIdeal Standard have only ever manufactured one type of seal and clip, so if you have a seal and clip like this, then this listing will be the replacement you require. PLEASE NOTE YOU WILL NOW RECEIVE THE NEW VERSION AS PICTURED, PLEASE SEE SECOND IMAGE FOR REFRENCE. THIS IS JUST FOR THE FLUSH VALVE ONLY, DOES NOT COME WITH THE SEAL, CLIPS, NUT. ETC NOTE: Replacing the diaphragm may not always resolve your problem as the fault could be with the valve itself but it is a cheap way to try and resolve and is usually successful. We also recommend washing your valve in warm water to ensure any limescale or grit which could be causing an issue is eliminated.

THERE ARE SPARE PARTS AVAILABLE FOR THE ORIGINAL SV93467 FLUSH VALVE WHICH ARE DETAILED AT THE BOTTOM OF THIS LISTING S362467 Conceala 2 Cistern - Top Inlet - Pneumatic Dual Flush Valve - No Flushplate - 6 or 4.5 litre flush We are currently using Royal Mail Parcelforce and DPD as our delivery providers, all small items will be delivered by Royal Mail, these can take up to three working days to reach you. I was going to replace the whole mechanism (it seems to be an Ideal Standard Pneumatic Dual Flush Valve SV93467) - but my problem is I can only access it through lifting up the flush plate – as it is a concealed system that is tiled in. I can easily twist and uncouple it, but only the thinner rectangular top end will fit out the gap, but the wider circular bottom end will not. All system components must be installed in accordance with uk water regulations. if in any doubt a suitably qualified person should be consulted.As of 01/07/2022 - Ideal Standard have no baskets available to fit this model. Please reuse the existing basket if able to do so. We will update this description with the basket part number once it becomes available. S362567 - Conceala 2 Cistern - Bottom - Bottom Inlet - Pneumatic Dual Flush valve - No Flushplate - 6 or 4.5 litre flush Valve height from top of cradle to top of valve is 180mm but overall height from bottom of cradle to top of valve is 270mm our operatives are all experienced within the industry and are more than happy to help with any questions. Conceala 2 universal height, top inlet cistern - pneumatic dual flush valve - no flushplate - 6 or 4.5 litre flush