Joined in 2023 
82 
63 About this deal
The rolling measure is pretty nifty; it lights up with three points so you can decide if you're measuring from the front edge, base or back edge and roll until that particular light is in the right place. Making sure the Bluetooth on your phone is on, select the the three bars icon in the upper left corner of the screen, and select the gear symbol to open settings.
Whether the job asks for the 3D floorplan design for professional use or handwork measure in daily, MEAZOR 3D brings the significant extent on measurement convenience. The floor plan mode ought to be really useful: it builds a floor plan after you point the laser at each corner in the room in turn. I found this measurement to be somewhat inaccurate, mostly because any movement of the MEAZOR from its starting location will affect the measurement. Meaning, if you are on the 8th screen (furthest to the right), you can’t easily access the first screen with one more swipe to the left. Sadly, while you can scan a curved wall, you can't really use it for scanning objects: you have to move the Meazor rather than what you're measuring, and you only get a single profile line where the laser measures, not a full 3D profile.This mode of operation could be used to convert a measurement on a scale drawing with various scale settings to a different length (probably only useful for scale drawings with no dimensions or smaller items that would be up-scaled to a larger size). It utilises sophisticated scanning technology to capture and process data, which is then used to construct a 3D model that can be viewed, edited, and exported for use in a variety of applications. The MEAZOR 6-in-1 Laser Measure tool has a very stylish look with an aluminum housing and a glass touchscreen on the front used to choose the measurement mode and change settings. If you want to exit a particular mode of operation, a short press on the power button backs it out and turns off the laser. Swiping left or right allows bring up the desired mode, and then touching the screen will activate the mode of operation.
No instructions on pairing the app to the Neoruler (apparently it's just always in promiscuous mode? Protractor – This mode allows measurement of an angle based on movement of the rotating wheel using the laser as a reference point. Pro-Laser Pythagorean – This mode only works for right triangles (where one angle is 90 degrees) and this would be most useful for a vertical measurement like a wall or fence that is difficult to access. You can chose imperial or metric measurements and then flip between millimetres, centimetres and metres or inches, feet and yards.Once the new project is created and named, that project name will appear at the top of the main screen. Secondly, most architects, engineers, or builders would not need to do this because most drawings have dimensions. Three new added modes come with Space/Volume Auto Calculation, 2D to 3D floorplan display and label measurements directly onto the snapped object. This app SEEMS to show measurements as a feature, but it's only for manually designating dimensions.
The specifications state that the battery life can be as little as 45 minutes under maximum power consumption, which is likely when the laser is on. You also need a very steady hand: make sure the device is on a tripod for this and even then, the measurements aren't accurate enough to use for precision work. Level – This mode is a two dimensional bubble level when the device is sitting flat on a surface, or a one dimensional level when on its side. This is convenient since you don’t have to go back into settings, unless you want to change from English to metric.dxf (AutoCAD) file, so it is possible to utilize these scans to develop an architectural or engineering drawing outside of the app. I used the MEAZOR several times over the course of a couple weeks for a total use time of approximately 2 hours before the battery needed to be recharged.
Great Deal 
New Comment