Lian-Li LANCOOL II MESH RGB Black LAN2MRX Tempered Glass ATX Case -Black Color - LANCOOL II MESH RGB - LAN2MRX

Product Information

Internally, the Lancool II Mesh surprised us with a highly thoughtful layout, making it easy to accommodate all sorts of hardware combinations. The main motherboard compartment doesn’t bring any surprises, and there is room to install two 2.5-inch drives behind the motherboard tray along with three 3.5-inch drives in the HDD caddy under the PSU shroud. An accessory is available to make the HDD caddies hot-swappable, sparing you from having to open the other side to plug in cables. We wouldn’t buy it unless you’re swapping drives on an almost-daily basis though as it’s super easy to open the other side to plug or unplug drives. This system can be pre-installed with a genuine Microsoft Windows 10 operating system. Please select the operating system you require for your PC from the drop down box above and it will be supplied and installed for you prior to shipment. I might be going to swap these fans one day but I'm currently looking at be quiet fans. Which one would be good to get as there are many types? Static pressure optimized fans are better where you have a lot of resistance to the air flow, such as on radiators, on front panels that have multiple layers of mesh/filters, or on front panels that are mostly closed off. Lighting effects of the 3 included ARGB fans can be fully controlled through the C button and M button located on the top front. Switching between 8 lighting modes has never been this easy.

GeekyOne said:I noticed that quite a few cases these days don't have the 5.25" drive bay or any drive bays at all.The problem is that for optimal air flow through the CPU cooler, you want an unobstructed path between a front intake fan and the rear exhaust fan. Even a single drive bay will offset the top front fan from the CPU/rear fan and cause turbulence which reduces the effectiveness of the CPU cooler.The Lancool II is a modern Mid-Tower with a stylish design and excellent cooling performance. It is has a robust steel frame, full mesh front panel and is perfect for RGB illumination. Optimised for airflow Thanks to the hinged panels, every corner of the Lian Li Lancool II Mesh C RGB Case is easy to access. Both tempered glass side panels open, and are held in place with a magnetic clip. The mesh panels on the PSU shroud also open out, allowing for easy installation of both the power supply and drive cage. Modular Shroud only thing I'd say is the case gets dirty faster than most so if you clean your pc out every few months your good but if not this isn't the case for you. ok thanks for that @30Valve it makes a lot of sense now more understandable. Ye I didn't know much about the negative and positive pressure. I'll have to change it.

With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives. Whether you rely on air cooling or prefer water-cooled systems, the Lian Li Lancool II Mesh C RGB Snow Edition can accommodate. With 176mm clearance for a CPU cooler, this is a particularly great chassis for AiO cooling loops. Innovative Design the top fans arnt relay needed has there no real benefit from them at lest to cool the cpu cooler its more or less for aio or rads. the front top and midel fan are for the cpu cooler and the bottom fan is for the gpu if you have an open front basement and grill on top.The Lancool II Mesh RGB is the latest update to Lian Li's popular Lancool series. This Mid-Tower case features a full mesh front panel, for improved airflow, and has been optimised for illumination as it features controller buttons to easily cycle through colours and effects of the three 120mm ARGB fans included. The Lancool II Mesh RGB also retains many of the characteristic features of the Lancool series such as a sleek, futuristic design and the use of premium materials, including SGCC steel and two tempered glass side panels. The Lancool II Mesh RGB at a glance:

LANCOOL II MESH RGB features a mesh front panel and mesh bottom left shroud panel,honeycomb vent design and built-in RGB fans,ensuring bountiful airflow delivered to your high-performance components while adorning the system with an RGB touch. Like a lot of premium cases, the LANCOOL MESH features a removable front radiator mount, which makes the installation of front-mounted radiators and fans a breeze. The enclosure also supports six 2.5-inch SSDs with dedicated mounts as well as three 3.5/2.5-inch devices thanks to the case’s dedicated drive mounts, which can be hot-swap enabled. Below are the full specifications of Lian Li’s LANCOOL II MESH, which measures in at 478x229x494 (LxWxH), making this enclosure a mid-tower chassis. The case supports ATX, MATX and Mini-ITX motherboards as well as EATX motherboards that are less than 280mm wide. This width makes this enclosure ready to support almost any consumer-grade motherboard. The Lian Li Lancool II Mesh C RGB Case has a premium design, carefully curated to facilitate advanced cooling. Many panels of this chassis feature a high-density mesh in a honeycomb pattern, to enhance airflow throughout the case. The natural airflow is boosted by the pre-mounted aRGB fans. Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.The Lian Li Lancool II Mesh C RGB Snow Edition Mid-Tower Case has a fully equipped I/O panel. An improvement on the original Lancool II Mesh, this model features the USB 3.1 Type-C port Found in pairs, these mounts are on the tray behind the motherboard, the bottom right flip shroud, and on the top mesh panel of the PSU chamber. SSDs can be mounted in this final location instead of the 120mm fans, depending on your need for storage or cooling. Even with the drives, the mesh is not fully covered, making for excellent ventilation. Additional Features Looking at this case, you can also see that the LANCOOL MESH’s side panels are both made of tempered glass and are hinged, making the internals of the case incredibly easy to access.Â