B and K Industries 109-503RP Anti-Sweat Toilet Tank Valve

Product Information

If you are having a problem with condensation forming on the exterior of your toilet tank, one way to correct the problem is to install an anti-sweat mixing valve. An anti-sweat valve is a device that mixes a small amount of hot with the cold water supply before it enters the toilet tank to raise the temperature of the water slightly. Warm humid air will condense on the porcelain surface of the toilet tank during summer months and may cause damage to the walls and floor of your bathroom. The cold water supplied to your house is brought in through underground piping that lowers the temperature of the water to 55 degrees Fahrenheit or less. This is about the same temperature as the cold air supplied by an air conditioner.

How To Stop Toilet Tank From Sweating? – Pick A Bathroom

Flush the toilet to drain the water from the tank completely. Step 3: Locate The Hot And Cold Water Supply LinesA cheaper alternative is to buy a portable air dehumidifier that you can place in your bathroom. With the dehumidifier, you will be able to bring down the temperature in your bathroom and therefore control a sweating toilet. 6. Use a Toilet Drip Tray Yes, it is normal for a toilet tank to sweat or cause condensation. It is a common occurrence that occurs when there is a difference between the temperature of the water inside the tank and outside air. Insulating a toilet tank is one of the best and most inexpensive ways of fixing a sweating toilet. It will sort out the issue for you, and you can do it on your own. You don't have permission to access "http://www.homedepot.com/p/Everbilt-1-2-in-Toilet-Anti-Sweat-Valve-850399/312882804" on this server.

How to Stop Condensation on Toilet Cistern? – Plumbing Wizard

If it is deteriorated, warped, or not properly installed, this can lead to a toilet that runs every few minutes. An anti-sweat valve preheats the water flowing to your toilet tank, therefore, preventing the toilet from sweating. It is installed behind your toilet and connected to the water supply line. Condensation on and under toilet cisterns can cause huge unseen problems. The warm air in the bathroom hits the underside of the toilet cistern and cold water pipes and condenses causing condensation immediately. Keeping a toilet cistern clean is an important step in preventing condensation and maintaining the overall appearance and hygiene of the bathroom.You will need to identify what type of condensation is occurring and where it is coming from. If you notice that there is condensation only around the lid of your toilet tank, then this could be caused by humidity in the bathroom or by a leaky pipe inside the tank itself. Poor Insulation: A bathroom that is not properly insulated can also contribute to high humidity levels and condensation on toilet cisterns.

Watts WAS 1/2 - Watts

To stop a toilet from sweating, consider insulating the tank, improving ventilation in the bathroom, and reducing overall humidity levels. Significant temperature variations between the water in the tank and the surrounding air can lead to increased sweating. 3. Inadequate InsulationYou should also avoid flushing the toilet straight after taking a shower when the air in the bathroom is more humid. 5. Install Air Conditioning