Zenith Industries ZN700001 Trim Puller

Product Information

If you have quarter round or other floor trim, it can be removed the same way, following the steps above. How to Remove Glue and Clean up

You are installing new floors. In this case, you might want to reuse the baseboards to save money. You don’t need to remove the baseboards for all types of flooring but it looks more professional when you do. Everything You NeedWith this trim removal tool kit, you'll also receive a total of eight valve caps for your tires. I have had this little workhorse for many years,” wrote one reviewer who was trying to find the same one for their son. “I searched online and found this beauty at an incredible price. It will be in his roll bag for the rest of his life. This is a must-have tool for a carpenter and will last a lifetime.” I knew there had to be an easier way to remove baseboards without damaging them or the walls. I found out how to do it and now you can too!Of course, if you don’t want to buy a new tool, you can remove baseboards with a putty knife, pry bar, and hammer (we’ve done that!) but this tool is inexpensive and will save you a lot of frustration. Why would you need to remove baseboards? Ahead of purchasing a crowbar or pry bar, here’s what to know about their differences, what they do, and where they can be applied. The Difference Between Pry Bars and Crowbars Suitable for: Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Peugeot, Renault, Rover, Seat, Skoda, Subaru, Toyota, Volkswagen, Volvo. Now that the baseboard is finally unglued from the wall, floor or another board, it’s time to use your trim puller. Align the trim puller between the baseboard and drywall (this will be where you just ran your razor blade).

Of course, now that you’ve removed the baseboards, you’ll need to clean up both the wall and the baseboards themselves. Tools Needed At Milwaukee®, Heavy Duty is more than just a slogan. It is a promise to offer the best to professional users. And then there are jobs that need a little bit of both. The removal of interior cosmetic parts is a perfect example. Most door panels will pop off with the right amount of elbow grease, but do it the wrong way — or with the wrong tool — and you’ll end up scratching the panel or worse. Use the putty knife to carefully and slowly scrape the wall where the caulking was previously located. Now that you’ve cleaned up both the wall and the baseboard you removed, you are ready to install them again.You don't have permission to access "http://www.homedepot.com/p/Zenith-Trim-Puller-Multi-Tool-for-Baseboard-Molding-Siding-and-Flooring-Removal-Remodeling-ZN700002/206509569" on this server.

But if you’re renovating your home and you are installing new carpet or laminate, you will likely want to remove the baseboards first. have been screwed in place, and you cannot see or access (maybe because of filler) the screw heads you may need to pry them out of the wall along with the baseboard in the next step and then remove them from the freed baseboard by unscrewing them. SIDE NOTE: If you don’t break through the caulk, it will make removing the trim more difficult because the caulk secures the trim to the wall. You can see what I mean in this tutorial where we apply caulk to a baseboard. STEP 2: Use the trim puller Most people who have a trim removal kit might not even use it primarily for removing trim, but it will definitely be stored with the auto repair tools. But did you know you can use trim removal tools outside the car as well? They’re just as effective on furniture upholstery as they are at the type in your vehicle. You can even use them for prying off molding, baseboards or anything where a wedge will give you an edge.Zenith by Danco exemplifies an innovative line of Pro & DIY demolition, restoration and remodeling tools that empowers you to achieve remodel and install effectively without damaging walls, floors and cabinets like normal pry bar tools. Scroll down to read more about these highly-rated crowbars and pry bars, and learn what reviewers had to say about them. TIP: The Trim Puller is designed to rotate left or right to remove trim, not up and down, like a pry bar.

If your trim is painted, you most likely have caulk applied in this joint. You need to run the razor blade until it looks like you have broken through the caulk. I have been able to utilize these pry bars putting in my vinyl plank flooring [and] these worked excellent while changing the brakes on my car,” wrote a reviewer. “These are very versatile, from one extreme to another, and handle both extremely well.” The Trim Puller Mini is the smaller version of the innovative and revolutionary tool, Trim Puller pry bar tool, designed to make trim removal faster and more efficient without damaging your trim or wallsTake the hammer and tap the top of the trim puller. This will allow the tool to slide behind the baseboard. Keep tapping until the flat part of the puller is flush with the top of the baseboard. This 10-in-1 vehicle trim removal tool is suitable for the following tasks: moulding trim and badge remover, windscreen wiper wrench, door rubber – metal clip insert, door weather strip remover, door trim – Bezel clip remover, door handle clip remover, headlamp spring clip tool, windscreen moulding clip remover, door rubber – plastic clip remover, serrated edge to clean up panel seam.