Easy Joint Paving Jointing Compound 12.5kg – Mushroom

Product Information

Less Effort: The wash and sweep in application method makes it easy to use and jointing paving is faster than traditional methods EASYJoint brush-in patio grout , is a really simple, fast and DIY friendly way to fill the joints in paving slabs and flagstones. Market-leading EASYJoint is ideal for all types of paving such as natural stone, limestone, porcelain, sandstone, Yorkstone, Indian Stone, granite setts and concrete flags.

Top Up. Use more EASYJoint to top up any low areas, repeating the washing process as described previously. Maintain the Width of Joint Throughout. Maintain at least a 3mm gap width throughout the depth of the paving material. Never have this type of paving butted together. See photograph. The original jointing compound for all weather paving. It can be used rain or shine, at any time with an oustanding finish. Overall EASYJoint seems like a good option. It works exactly like it says on the tin and with proper application, there is very little that can go wrong. However, there does seem to be a small issue with production where around 10-20% of the tubs have already set before being opened. Joint-IT UsingEASYJoint will result in a paving gap that is completely filled without the need of doing any dirty work, kneeling and compressing the material by hand. The material will last for years and provide a strong joint that will resist the elements and stand the test of time - This compound is cost and time efficient compared other traditional jointing methods.Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings. Additionally, ensure the project has a suitable “fall” to allow surface water to drain away. Base Mix

An all year round hard landscaping product to point your paving that can be used whatever the weather conditions are before, during or after application In wet weather conditions, the curing process will be suspended. Prolonged periods of rain, or several intermittent showers will considerably extend the setting times. Again, this will not affect the final integrity of the product in any way provided water can drain easily away and so allow even curing throughout the joints (as previously explained). Apply a final rinse of water across the surface to wash off any EASY Joint residue and to aid the final compaction process.

Step 5. Top-up

IMPORTANT The project’s ground conditions must be free draining. If the area stays naturally wet and rarely dries out, or if there is a high water table, then EASYJoint should not be used. It’s super simple to use, it’s fast, effective and fills joints in all types of paving slabs and flagstones with ease. No experience necessary! Simply simply soak the paving with water before you start and then sweep and wash the jointing compound into the joints, letting the water take the strain. Yes, theoretically EASYJoint can be used below 3 degrees down to freezing conditions, however in these conditions, the use of lots of water becomes more difficult with a greater risk of staining. Where possible avoid using below 3 degrees, use with caution. Does EASYJoint stain paving slabs? EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water.

Due to the structural requirements of a driveway and that generally, the bedding mix is stronger than that of a patio or path, the use of EASY Joint is not recommended. Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe.

EASYJoint is a very effective, super fast and aesthetically pleasing way to fill/complete joints between paving materials including slabs and pavers for example. The great thing about Joint-IT products is that they are expert hardscape products. They offer the best possible combination of advanced technological formulations and environmentally friendly raw materials. All while promising a strong and effect solution for your paving needs. minimum for foot traffic (30mm preferably); 30mm minimum for vehicular traffic, subject to a solid base EASYJoint is available in a selection of 5 colours which is one of it's main selling points. Whatever your project, there is a colour suitable for it. Joint-IT has comparable colours, but only in 3 out of 5 colours. It's important to note that the two products aren't interchangeable, so if you've already started a project with one, you can't simply switch to the other, but the colours are a very similar with 3 of the ranges.