Wi-Fi settings are a little basic, with the TP-Link Deco X50-5G setting its own 2.4GHz and 5GHz channels automatically. Wi-Fi settings also include a guest network. Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client's device.

HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit tp-link.com/homeshield for more information.Actual 5G downlink speeds vary between households. Factors affecting 5G speeds include the internet service level, real-time network capacity, equipment and client limitations, and environmental factors. Cellular speeds will depend on your location. I can get around 25Mbit/s when running on 4G, although I’ve got over 100Mbit/s in areas with a 5G connection. Performance

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)

Cover Every Corner of Your Home

Insights) можете да проверявате кои сайтове посещават вашите деца и колко време прекарват във всеки от тях. Това е чудесен начин да знаете, че вашите деца са в безопасност и че се забавлявай онлайн.

What should I do if my Deco 4G/5G Product shows No Signal or No Service on Deco App? 06-25-2023 12802 Wi-Fi 6 и други функции, включително OFDMA, MU-MIMO, 1024-QAM, HE160 и BSS Color изисква клиентите също да поддържат съответните функции. Честотната лента от 160 MHz може да не е налична в обхвата 5 GHz в някои региони/държави поради регулаторни ограничения.Troubleshooting Guide of DDNS function on TP-Link Wi-Fi Router, LTE Gateway Router or Deco Router 06-20-2023 26964 To test the X50’s performance, I set up the system in my own home, with one node connected to the main internet line in the study and the other two in the adjoining bedroom and downstairs living room. Then I connected a laptop to the 5GHz network, carried it around various rooms and measured read and write speeds to an Asustor Drivestor 4 Pro NAS appliance connected to one of the gigabit Ethernet ports on the primary Deco station. Uses of WiFi 6 and other features including OFDMA, MU-MIMO, 1024-QAM, and BSS Color require clients to also support the corresponding features.

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process Gigabit internet speeds require compatible service plans and equipment. All WAN/LAN ports will operate as either WAN or LAN ports. Only one port can serve as a WAN port at a time. HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visittp-link/homeshieldfor more information. A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade The TP-Link Deco X50-5G is an AX3000 Wi-Fi 6 system. Its 5GHz band runs at a maximum speed of 2402Mbit/s and its 2.4GHz band at a maximum of 574Mbit/s. That’s relatively mid-range by today’s standards.To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. READ NEXT: The best wireless routers you can buy TP-Link Deco X50 mesh router review: Price and competition Configuration is through the TP-Link Deco app. This makes it supremely easy to install the router: just follow the wizard through, and the app connects to the router, sets up the internet connection and prompts you to create a secure network. Feature Filter: All Q&A of functional explanation or specification parameters Configuration Guide Troubleshooting Before You Buy When You Set Up Further Assistance User Application Requirement If Something Goes Wrong FAQs